SILENT KNIGHT 4720 Installation Manual download pdf (Page 26)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

BYPASS#2:YES

If this option is selected this code will be able to bypass (disable) intrusion zones.

ARM#2:YES

This option enables the code to be used to arm (close) the system.

DISARM#2:YES

This option enables the code to be used to disarm (open) the system.

PROGRAM#2:YES

This option enables the code to be used to program the secret codes for user codes 2-255 and

the user-programmable options (Time Windows, Holidays, Access options) and daylight sav-

ings time adjust dates.

CODE2#2:NO

When this option is selected, the code becomes a restricted code, for use by guests,

baby-sitters, and other temporary system users.

This means that when the CODE2 key is pressed, the code can disarm the system once. Nor-

mally CODE2 restricted codes can never disarm the system.

HIGH SEC#2:NO

When this option is selected, the code becomes a high security code, which will require the

high security code for door access. The high security code (Code 255) is entered on the touch-

pad after the primary code.

CARD ONLY#2:NO

The Card Only option allows a person to gain access to a door only by a card, not by a touch-

pad.

WIN GRP#2:32

Select the time window group (programmed in Window Groups, Menu 9) during which each

access code can be used.

■ To make it possible to use a particular code all the time, select “always” (3 2).

■ To make it impossible to use a particular code at any time (for example, because the

card has been lost) select “never” (3 3).

Example:

Suppose you have programmed Time Window #1 for 8:00 AM to 5:00 PM, Monday

through Friday, and you have programmed Time Window #2 for 10:00 AM to 5 PM on

Saturdays (Time Windows, Menu 0). Then, suppose you have assigned Windows #1 and

#2 to Window Group #4 (Window Groups, Menu 9).

If you want the code to be able to gain access and/or use a touchpad during the times from

8:00 AM to 5:00 PM on weekdays, and from 10:00 AM to 5 PM on Saturdays, then select

Error! for the WIN GRP option. Any group can be assigned to any code and to more than

one code. A code can be assigned to only one window group.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 81 82

No comments

SILENT KNIGHT 4720 Installation Manual Page 26