SILENT KNIGHT 4720 Installation Manual download pdf (Page 49)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

NOTE

These zones will be displayed as AUXILIARY on the LCD. If LOCAL is selected, the panel

will not dial out.

12 (UNUSED) can be selected to create a zone that does not cause an alarm.

Do NOT select

14 or 15 as zone type. They are there to allow additional zone types to be made available in the

future.

Zone Type 6 was changed from “Gas” to “Supervisory” with Revision J of the 4724-2 con-

trol software.

SIL ALM:NO

If you select this option, alarms activated by this panic key will be reported to the central sta-

tion, but no audible alarm will sound.

REP DLY:NO

If you select this option, alarms activated by this panic key will be reported after a pro-

grammed delay time. The delay time is programmed in Timers (Menu 11).

BELL DLY:NO

Select this option to create a delay between the time an alarm condition is sensed by a zone of

the specified type and the time the alarm bell is sounded.

NO SHUTD#1:NO

If this option is selected, the bell will not shut down until the panel is disarmed.

The display now advances to the next touchpad panic zone.

Table 11: Loop Response Times

Selection # Loop Response Time

0 0.01 seconds

1 0.06 seconds

2 1.0 second

3 10.0 seconds

Table 12: Zone Types

Selection # Zone Type Selection # Zone Type

0 HOLDUP 8

WATER

1FIRE 9

HEAT

2 EMERGENCY 10

COLD

3 PANIC 11

LOCAL

4 BURGLARY 12

UNUSED

1, 2

5 TAMPER 13

DOORBELL

GAS

UNUSED

1, 2

UNDEFINED

UNUSED

1, 2

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 81 82

Comments to this Manuals

No comments

SILENT KNIGHT 4720 Installation Manual Page 49

Comments to this Manuals

Related products and manuals for Security access control systems SILENT KNIGHT 4720