SILENT KNIGHT 4720 Installation Manual download pdf (Page 38)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

24HR#1:NO

Select this option if the zone will be monitored for alarm conditions 24 hours a day (for exam-

ple, if it is a fire, emergency, or tamper zone).

EXIT#1:NO

Select this option if the zone will have an exit delay time or if it is an interior zone that is in the

exit corridor.

ENTRY1#1:NO

The system has the capability of having two separate entry delay times. Select this option if the

zone will be controlled by Entry Delay #1.

ENTRY2#1:NO

Select this option if the zone will be controlled by Entry Delay #2.

INTERIOR:NO

Interior zones can be bypassed as a group using the INT key.

NOTE Select this option if the zone will be an interior zone.

BYPASS#1:NO

Select this option if you want to be able to bypass (shunt) the zone. If you do not select this

option for a particular zone, you will not be able to bypass that zone.

NOTE Fire zones must NOT be bypassable.

CHIME#1:NO

This option enables the chime function for a particular zone. When the chime function is

enabled, the CHM key can be used to turn a door chime on and off when the system is dis-

armed.

AREA#1:1

Type in the number of the area to which you want to assign the zone. A zone can be assigned to

only one of eight areas.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 81 82

No comments

SILENT KNIGHT 4720 Installation Manual Page 38