SILENT KNIGHT 4720 Installation Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Regency
®
Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98
27
8.6 Dialer (Menu 5)
COMP PH
If you will be using the Downloading feature, you must enter the phone number that will be
connected to the computer. The number entered can be up to 16-digits long.
If a pause is needed, such as after dialing “1” for a long distance number, enter “A” (0 1). If an
internal phone system is being used in which you must dial a special digit to establish an out-
side line (and wait for a second dial tone), enter “D” (0 4) after the digit to establish the outside
line. The procedure for entering alphabetic and other characters is explained in Section 7.5 of
this manual.
NOTE The # and * keys can be used: type 73 for “#” and 80 for “*.”
Example:
If you must dial “9” before being able to dial the outside number of “555 3333,” you
would enter “9D555-3333,” or “6 9 0 4 6 5 6 5 6 5 6 3 6 3 6 3 6 3”
RETRY:NO
If this option is selected, the system will try again to send a report 15 minutes after it has failed
its maximum number of attempts. If it fails all attempts again, it will not try another time.
LINE 2 EN:NO (Line 2 Enable)
Select this option if you are using two phone lines (requires the use of the Model 4175 Dual
Phone Line Monitor).
GROUND ST:NO
Select this option if you are using a ground start telephone network.
LINE MON:NO
Select this option if you will be using the Model 4175 Dual Phone Line Monitor. You can
monitor Line 1 only, if you do not have a second phone, but you cannot have both a monitored
line and an unmonitored line.
ANSWER RING:YES
Select this option if you wish to have the computer call the panel and download in the same
call. If you do not select this option, the communicator will wait until the phone stops ringing,
then dial up the computer for maximum security.
STORE OP/CL:NO
If this option is selected, the system will store opening and closing events, until the next report
is sent. At that time, it will transmit all the events to the central station.
UP/DOWNLOAD:YES
Select YES to enable remote uploading and downloading. When the panel receives a signal for
downloading, it will dial the computer phone number and use the account number that is pro-
grammed for Account #4.
FAIL ATTM:5
Enter the number of attempts (1-15) that the communicator will try to dial out before it gives a
dialer-failed signal.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 81 82

Comments to this Manuals

No comments