SILENT KNIGHT 4720 Installation Manual download pdf (Page 45)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

NOTE Characters preceded by ¥ are “display macros” (see Section 7.5 of this manual).

¥D causes the actual date to be displayed as part of the message.

¥T causes the time to be displayed.

When using the 5540 Downloading Software, “\” replaces the “¥” character.

8.12 Timers (Menu 11)

SHUTDWN:90s

Decide the number of seconds that you want the audible alarms to be active. Then divide this

number by 10 and enter the result (1-255).

EXIT:30s

Enter (in seconds) the length of the exit delay (1-255).

ENTRY1:30s

Enter (in seconds) the length of the entry delay for zones controlled by Entry Delay #1 (1-255).

ENTRY2:60s

Enter (in seconds) the length of the entry delay for zones controlled by Entry Delay #2 (1-255).

SWINGER BYPS:4h

Enter (in hours) the length of the swinger window (1-24). If the SWINGER BYPS option has

been selected (System, Menu 4), a swinger bypass (shunt) will occur on the fifth trip when a

zone has caused four alarms within this time period.

RF SUPRV:24h

Enter (in hours) the supervision interval (2-24).

Example:

If you enter 3 the system will check for supervisory transmissions from the RF transmit-

ters every three hours.

DOOR STRK:6 .8s

In this step, you will program the length of time that the doorstrike stays activated (0.8-12 sec-

onds). The display will always show “.8” to indicate that the programmed length of time is 0.8

seconds times the number you select. 4660 series touchpads use one second timers.

NOTE This time period is the maximum length of time the doorstrike will remain activated, allowing

someone to open the door. If a door contact is connected to the touchpad, the doorstrike will

turn off one second after someone opens the door. If no door contact is connected to the touch-

pad, the doorstrike will remain activated for the programmed length of time, regardless of

whether the door has been opened.

DOOR OPEN:60s

Enter (in seconds) the maximum time that the door can remain open before the system will

send a Door Left Open Report (1-255 seconds).

REP DELAY:15s

Enter (in seconds) the amount of delay that you wish to have between the time that an alarm

condition is sensed and when the system will actually report the alarm (1-255 seconds).

Delayed reporting is selectable by zone in Zone Types (Menu 6).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 81 82

No comments

SILENT KNIGHT 4720 Installation Manual Page 45