SILENT KNIGHT 4720 Installation Manual Page 65
- Page / 82
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Regency
®
Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98
57
2. 1 RLY[4].7 = AZONES[18].5
The output label RLY[4].7 refers to the eighth output (.7) on the second group of outputs
on the second 4180 module ( [4] ). The status label AZONES[18].5 refers to the armed
status of the sixth zone (.5) of the zone group to which [18] has been assigned (Zones 137
- 144)—in other words, Zone 142. Table 19, “Output Designations,” shows which zones
are assigned to each bracketed number.
3. 1 TER16 = (THR = 1) OR (THR = 2)
The output label TER16 refers to Terminal 16 of the 4720. (THR, = 1) refers to the hour
that begins at 1:00 AM and ends at 1:59 AM. (THR, = 2) refers to the hour that begins at
2:00 AM and ends at 2:59 AM. If the current time falls within either of these two intervals,
the LED connected to Terminal 16 will light. Because these two time periods happen to be
consecutive, the LED will remain on continuously from 1:00 AM to 2:59 AM; it will not
go off between the two time intervals.
Table 18: Programmable I/O Output Labels (Read/Write)
1
Label
2
Data Type Function
RLY [4] BITS 4180 Status Relays
TER16 BIT Output on Terminal 16
TER15 BIT Output on Terminal 15
TER18 BIT Output on Terminal 18
X10[4] BITS X-10 output bits
SCR[8]
NUMBER,
BITS
User scratch area
NOTE 1. An output can be generated (written-left side of if as a result) in inter-
nal condition or its own status can be read (right side of statement) to
generate an output on some other device.
2. In this column the number in brackets [ ] indicates how many devices
or components of this type available.
Table 19: Output Designations
Label Function
RLY[1] Outputs on 4180 Module 1, Connector P2
RLY[2] Outputs on 4180 Module 1, Connector P3
RL [3] Outputs on 4180 Module 2, Connector P2
RLY[4] Outputs on 4180 Module 2, Connector P3
RLY[1].0 Outputs on 4180 Module 2, Connector P2, Pin 8
RLY[1].1 Outputs on 4180 Module 2, Connector P2, Pin 7
…
RLY[1].7 Outputs on 4810 Module 1, Connector P2, Pin 1
RLY[2].0 Outputs on 4180 Module 1, Connector P3, Pin 8
RLY[2].1 Outputs on 4180 Module 1, Connector P3, Pin 7
- Installation Manual 1
- 2266 Second Street N orth 2
- FCC Notices 3
- Table of Contents 4
- List of Figures 7
- List of Tables 8
- Section 1: Introduction 9
- Section 2: UL Requirements 10
- Section 3: Installation 11
- MODEL 4720 12
- 3.2 Zone Expanders 13
- 3.3.1 Installation 14
- Section 4: Touchpad Operation 15
- 4.2 Touchpad Functions 16
- Section 5: Area Control 17
- 5.2 Area Assignments 18
- 7.1 Entering Program Mode 19
- 7.3 Programming the Options 19
- 7.4 Correcting Errors 20
- 7.5 Entering Text 20
- Table 2: Text and Characters 21
- 7.6 Programming Secret Codes 22
- 8457G15A.DS4 23
- 8.1 Time Windows (Menu 0) 24
- 8.2 Access (Menu 1) 25
- 8.3 Holidays (Menu 2) 27
- 8.5 System (Menu 4) 27
- Selection Default Mode 28
- “Exceptional” 31
- 8.6 Dialer (Menu 5) 35
- 8.7 Zone Options (Menu 6) 36
- Selection Loop Response Time 37
- TYPE#1:FIRE 39
- LOCATION#1 39
- SIL ALM#1:NO (Silent Alarm) 39
- REP. DLY#1:NO 39
- Table 7: Zone Types 39
- 8.8 Accounts (Menu 7) 40
- 8.9 Intercom (Menu 8) 42
- 8.10 Window Groups (Menu 9) 43
- 8.11 Messages (Menu 10) 43
- 8.12 Timers (Menu 11) 45
- Selection Day 46
- 8.13 Key Options (Menu 12) 47
- 8.14 Key Zones (Menu 13) 48
- 8.15 Area Options (Menu 14) 50
- 8.17.2 Program Operations 51
- Additional 52
- Info Needed 52
- 8.17.3 Changing the Program 56
- Inserting a New Statement 56
- Table 15: Default I/O Program 58
- 8.19 Code 0 and Code 1 59
- 9.1 Starting and Ending 59
- 9.2 Viewing Status 60
- 9.3 Uploading Event Memory 61
- 9.4 Programming Procedure 61
- Figure 5: Auxiliary Devices 62
- Table 16: Logical Operators 63
- Table 19: Output Designations 65
- Data Type Function 67
- Table 21: Zone Groups 69
- 11.1.1 Open/Close Groups 70
- 11.1.2 Exception Reporting 70
- 11.1.3 Open/Close Trouble 70
- 11.1.4 Auto Open/Close 70
- 11.2.1 New Programming Tools 70
- 11.3 New Options 71
- 11.4 Operational Changes 72
- Built-In Programmer 73
- Arm Delay 73
- Door Contact 73
- Entry Zones 73
- ONE YEAR LIMITED WARRANTY 74
- Numerics 75
Related products and manuals for Security access control systems SILENT KNIGHT 4720
(48 pages)© 2020, manymanuals.com. All rights reserved. | 0.246 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals