SILENT KNIGHT 4720 Installation Manual download pdf (Page 22)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

7.5.3 Display Macros

There are several “macro” message characters that activate special displays that can be embed-

ded within any message. Be aware that the displays take a certain number of characters each.

When using the 5540, the macro characters are preceded with a “\” (backwards slash) charac-

ter. In the built-in programmer macro characters are preceded by the character “¥.” To enter

this character, press 28 on the touchpad.

Example:

• To display ARMED with the armed areas on Line 1 of the LCD, enter ARMED:\A for

System Message #57.

• To display DATE with the current date on Line 2, enter DATE:\D for System Message

#58.

NOTE As you are programming, you will see the shortened form of the message. During normal use,

the actual, non-abbreviated message will appear.

7.6 Programming Secret Codes

To access the Secret Codes Menu, press 7 TEST, then enter Code 0. This menu is useful if you

only want to change secret codes, without going through all the options in the Access Menu.

To reprogram Code 0 (installer's code) or Code 1 (main user's code), you must use this menu.

These two codes cannot be changed in the Access Menu.

Table 3: Display Macros, Defined

Macro Function Display Width

\T TIME DAY HH:MM AM 9 + day field

\M 24 HR TIME DAY HH:MM 6 + day field

\D DATE MM/DD/YY 8

\E DATE (European format) DD/MM/YY 8

\A ARMED AREAS 12345678 8

\R READY/NOT READY READY, NOT READY,

READY12345678

(N/A)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 81 82

No comments

SILENT KNIGHT 4720 Installation Manual Page 22