SILENT KNIGHT 4720 Installation Manual download pdf (Page 73)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

Built-In Programmer

Some menus have been changed to allow jumping to a specific numbered item: these are Menu

7 (Accounts) and Menu 10 (System Messages). This makes it easier to change specific items.

Menu 14 (Area Options) includes the new area arming options Menus 4 and 11 also have new

options. Menu 16 (Prog. I/O) allows programming using the new I/O operations.

Arm Delay

The arm delay only causes touchpad beeps during the last five minutes of the delay touchpad

beeps can be disabled by the Entry/Exit PZT option.

Door Contact

A delay was added to the door open timer when the door is first closed after legal access. In

door access applications where the door contact is used, the door frequently closes and then

bounces open enough for the contacts to reopen. On older revisions, the bounce open would

cause a Door Forced Alarm. On Revision H the door is allowed a three second period after the

first contact closure during which the contacts are ignored.

Entry Zones

On older revisions, entry zones which are restored before the end of the entry delay would not

report a restore. On Revision H the entry zones will report a restore after the end of the Entry

Delay and Alarm Report.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 81 82

No comments

SILENT KNIGHT 4720 Installation Manual Page 73