SILENT KNIGHT 4720 Installation Manual download pdf (Page 46)

Regency

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A) Revised 8/98

SMOKE RST:2s

Enter the number of seconds the smoke detector power is turned on after the smoke detector

has been reset (1-15 seconds).

MENU TIME:10s

For this option, you enter the area arm menu time (0-255 seconds).

In a split arming system, the user goes into the Area Arm Menu by entering an access code.

The LCD shows a continuous display of key prompts to help the user arm and disarm individ-

ual areas. If a key is not pressed during the time period you have programmed in the Menu

Time option, the system exits the Area Arm Menu.

ARM DELAY:0m

Enter (in minutes) the length of the delay (0-255) before Auto Close occurs (see Time Win-

dows, Menu 0). (The delay is added at the end of the auto close time period.) If you select 0,

there will be no delay.

LOG 4150:0h

Enter the number of hours between automatic printouts of the 4150 sensor readings (0-255).

To disable the automatic printout function, enter 0.

AUTO TEST:NO

If you will be using one of the test features below, you MUST select this option.

TEST DAY:SUN

This option allows you to select what day of the week the system will send a Test Report to the

central station. Enter the number next to the appropriate day in Table 10. Note that only one

day can be selected as a test day. However, to send a test every day of the week, select “8”

(daily).

Table 10: Test Day Choices

Selection Day

0 Sunday

1 Monday

2 Tuesday

3 Wednesday

4 Thursday

5 Friday

6 Saturday

7 None

8 Daily

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 81 82

No comments

SILENT KNIGHT 4720 Installation Manual Page 46